Intensification of the rate of production of an annular electrochemical reactor used to conduct diffusion controlled reactions by the combined swirl flow and surface roughness

Rates of mass transfer at the inner rough surface of an annulus were determined under swirl flow by an electrochemical technique which involves measuring the limiting current of the cathodic reduction of K3Fe(CN)6. Roughness was made by cutting longitudinal grooves in the inner cylinder transverse to swirl flow. The variables studied were solution velocity, peak to valley height of the roughness element, physical properties of the electrolyte, active length of the inner cylinder and the effect of drag reducing polymers. The rate of mass transfer was found to increase with increasing swirl flow velocity and the degree of surface roughness. Mass transfer data at smooth and rough surfaces were correlated by dimensionless correlations. Drug reducing polymers were found to decrease the rate of mass transfer by an amount ranging from 5 to 23%. Implication of the present results for the design and operation of high space-time yield annular and catalytic reactors used to conduct diffusion controlled reactions such as electro organic synthesis; electrochemical waste water treatment; photo catalytic reactions and immobilized enzyme catalyzed biochemical reactions etc., were highlighted. The importance of the present results in designing more efficient annular membrane equipment?s with inner corrugated membrane to conduct processes such as reverse osmosis, dialysis and ultra-filtration under swirl flow was pointed out. By virtue of the analogy between heat and mass transfer the importance of the present results in designing more efficient heat exchanger was noted.